The CC925 Series of High Pressure Axial Fans have been used in the mining industry for the past 15 years.
Designed specifically for high pressure applications the CC925 is tailored towards areas with low clearances and small duct diameter. Available as single, twin or Triple stage with flow rates up to 18 m³/s and pressures up to 3.6 kPa per stage. The CC925 uses fixed pitch sand cast one piece impellers for increased efficiency and longevity.
CC925
Product Guide
| Description | Fan Speed | Stages | Peak Pressure | Max Volume | Blade Angles | Motor Size |
|---|---|---|---|---|---|---|
| CC925 Axial Fan Twin Stage | 2995RPM | 2 | 6.4kPa | 17m3/s | Fixed Pitch | 2 x 45kW |
| CC925 Axial Fan Twin Stage | 2995RPM | 1 | 3.7kPa | 17m3/s | Fixed Pitch | 1 x 45kW |
| Fan Specification | Description |
|---|---|
| Fan Design | Contra-Rotating |
| Fan Stages | Single or Twin Stage Configurations |
| Motor Power | 45kW Per Stage |
| Internal Diameter | 900mm |
| Casing Thickness | 8mm |
| Casing Finish | HD Galvanising, Paint Finish on Request |
| Flange OD | 1006mm |
| Hole PCD | 960mm |
| Number of Holes | 16 |
| Hole Size | 18mm |
| Hole Orientation | Offset from Top Dead Center |
| Lifting Mechanism | Full Length Lifting Bar with 40mm Holes |
| Serial Numbering | Laser Cut Stainless Steel Plates |
| Airflow And Rotor Direction | PolyCarbonate Arrows on Casings |
| Impeller Specification | Description |
|---|---|
| Impellar Material | AC601 Aluminium Alloy or SG Iron |
| Design | High Efficiency Fix Pitch One Piece Castings |
| Casting Method | Sand Casting |
| Finish | Bare Aluminium, Epoxy Coatings on Request |
| Motor Specification | Description |
|---|---|
| Windings | H Class Custom Specfication |
| Insulation | Double H Class Insulation |
| Efficiency | >94% |
| Voltage | 415v, 525v, 690v and 1000v |
| Frequency | 50hz |
| Poles | 2P |
| Speed | 2995RPM |
| Frame | D225 |
| Mounting | Foot Mounting |
| Leads | 1m Extended From Casing |
| Terminal Box | External on Fan Casing |
| Terminal Box Protection | Steel Guard around Box |
For sales, engineering, repair or general enquiries, call us, send us a message or email the relevant team member.
