The CC480 Series of Meduim Pressure Axial Fans have been a developed to ventilate tight small headings, underground workshops or cabins. Available as single stage tube axial fans with flow rates up to 6m³/s and pressures up to 800Pa. The CC480 is completely customisable to meet a range of duties as required. Various impeller designs are available to meet your application.
CC480
Product Guide
| Description | Fan Speed | Stages | Peak Pressure | Max Volume | Blade Angles | Motor Size |
|---|---|---|---|---|---|---|
| CC480 Single Stage Tube Axial | 2995RPM | 1 | 750Pa | 6.5m/s | 40 Degree | 1 x 11kW |
| 2995RPM | 1 | 750Pa | 5m3/s | 30 Degrees | 1 x 7.5kW | |
| 2995RPM | 1 | 750Pa | 3.7m3/s | 20 Degrees | 1 x 7.5kW | |
| 2995RPM | 1 | 750Pa | 2.5m3/s | 10 Degrees | 1 x 2.5kW |
| Fan Specifications | Description |
|---|---|
| Fan Design | Single Stage |
| Fan Stages | Single Stage Configuration |
| Motor Power | 2.5kW to 11kW |
| Internal Diameter | 480mm |
| Casing Thickness | 4mm |
| Casing Finish | HD Galvanising, Paint Finish on Request |
| Flange OD | 555mm |
| Hole PCD | 524mm |
| Number of Holes | 4 |
| Hole Size | 12mm |
| Hole Orientation | Offset from Top Dead Center |
| Lifting Mechanism | Single Point |
| Serial Numbering | Laser Cut Stainless Steel Plates |
| Airflow And Rotor Direction | PolyCarbonate Arrows on Casings |
| Impeller Specifications | Description |
|---|---|
| Impeller Material | AC601 Aluminium Alloy |
| Design | Variable Pitch |
| Casting Method | Sand Casting |
| Finish | Bare Aluminium, Epoxy Coatings on Request |
| Motor Specifications | Description |
|---|---|
| Windings | H Class Custom Specification |
| Insulation | Double H Class Insulation |
| Efficiency | >94% |
| Voltage | 415v, 525v, 690v and 1000v |
| Frequency | 50hz |
| Poles | 2P |
| Speed | 2995RPM |
| Frame | 90L to 160M |
| Mounting | Foot Mounting |
| Leads | 0.5m Extended From Casing |
| Terminal Box | External on Fan Casing |
| Terminal Box Protection | Steel Guard around Box |
For sales, engineering, repair or general enquiries, call us, send us a message or email the relevant team member.
