The newly designed CC1800 Axial Fans are designed specifically for booster applications. Available as single or twin stage configurations with flow rates up to 105 m³/s and pressures up to 4 kPa per stage. The CC1800 is a variable pitch design capable of a wide range of duties and applications.
CC1800
Product Guide
| Description | Fan Speed | Number of Blades | Blade Angles | Motor Size |
|---|---|---|---|---|
| CC1800Mk1 Axial Booster Fan | 1495RPM | 12 | 42-57 Degrees | 160kW to 400kW |
| 1495RPM | 6 | 42-62 Degrees | 110kW to 350kW | |
| 990RPM | 12 | 62-72 Degrees | 150kW to 220kW |
| Fan Specification | Description |
|---|---|
| Fan Design | Co-Rotating |
| Fan Stages | Single or Twin Stage Configurations |
| Motor Power | 110kW to 300kW |
| Internal Diameter | 1800mm |
| Casing Thickness | 8mm with 20mm Machined Impeller Track |
| Casing Finish | Galvanising |
| Flange OD | 1986mm |
| Hole PCD | 1900mm |
| Number of Holes | 24 |
| Hole Size | 22mm |
| Hole Orientation | Offset from Top Dead Center |
| Lifting Mechanism | Full Length Lifting Bar with 40mm Holes |
| Serial Numbering | Laser Cut Stainless Steel Plates |
| Airflow And Rotor Direction | PolyCarbonate Arrows on Casings |
| Impeller Specification | Description |
|---|---|
| Blade Material | AC601 Aluminium Alloy or SG Iron |
| Hub Material | SG Iron Cast Hub |
| Design | High Efficiency Variable Pitch Castings |
| Casting Method | Sand and Gravity Feed Casting |
| Finish | Bare Metal, Epoxy Coatings on Request |
| Motor Specification | Description |
|---|---|
| Windings | H Class Custom Specfication |
| Insulation | Double H Class Insulation |
| Efficiency | >94% |
| Voltage | 415v, 525v, 690v and 1000v |
| Frequency | 50hz / 60hz (6P Opertation Only @ 60Hz) |
| Poles | 4P, 6P |
| Speed | 990RPM / 1475RPM |
| Frame | D280 / D350 |
| Mounting | Foot Mounting |
| Leads | 1m Extended From Casing |
| Terminal Box | External on Fan Casing |
| Terminal Box Protection | Steel Guard around Box |
For sales, engineering, repair or general enquiries, call us, send us a message or email the relevant team member.
