The CC2650 Axial Fan model is one of the largest diameter axial fans manufactured by Clemcorp.
Designed specifically to suit the unique rigours of underground metalliferous mine ventilation, we have attained market leading fan efficiencies in the most robust fan structure available anywhere in the industry. The CC2650 can safely run at up to 990 RPM operating speed, allowing the fan to generate high pressures and volumes with a variety of hub sizes.
CC2650
Product Guide
| Description | Fan Speed | Number of Blades | Blade Angles | Motor Size |
|---|---|---|---|---|
| CC2650Mk1 Primary Fan | 990PRM (Max) | 22 (Max) | 45-65 Degrees | 250kW to 1800kW |
| 990RPM (Max) | 11 | 45-65 Degrees | 250kW to 1300kW |
| Fan Specification | Description |
|---|---|
| Fan Design | Vane Axial |
| Fan Stages | Single or Twin Stage Configurations |
| Motor Power | 250kW to 1800kW |
| Internal Diameter | 2650mm |
| Casing Thickness | 12mm with 25mm Machined Impeller Track |
| Casing Finish | Painted Interzone 954 Paint Finish on Request |
| Hole Orientation | Offset from Top Dead Center |
| Lifting Mechanism | Rated Lifting Points |
| Serial Numbering | Laser Cut Stainless Steel Plates |
| Airflow And Rotor Direction | PolyCarbonate Arrows on Casings |
| Impeller Specification | Description |
|---|---|
| Blade Material | AC601 Aluminium Alloy, SG Iron or SAF2205 Duplex Stainless Steel |
| Hub Material | AS350 Fabricated Steel |
| Design | High Efficiency Variable Pitch Castings |
| Casting Method | Sand and Gravity Feed Casting |
| Finish | Bare Metal, Epoxy Coatings on Request |
| Motor Specification | Description |
|---|---|
| Windings | F Class or H Class Custom Specfication |
| Insulation | Customer Spec |
| Efficiency | >94% |
| Voltage | 415v, 525v, 690v, 1000v and 3300v |
| Frequency | 50hz or 60hz |
| Poles | 6P, 8P |
| Speed | 745RPM, 990RPM |
| Frame | Up to D630 Frame |
| Mounting | Foot Mounting |
| Leads | Varies |
| Terminal Box | External on Fan Casing |
For sales, engineering, repair or general enquiries, call us, send us a message or email the relevant team member.
